Applications
- Initial electrical insulation
- Cable harness production
- Protection of low- and medium-voltage cable connections
- Suitable for indoor and outdoor applications
Benefits
- Outstanding resistance to abrasion, corrosion and moisture
- Very good dielectric strength and mechanical resistance
- Uniform unwinding force
- Excellent conformability
- Good sealing properties
Storage Conditions
The Rolls should be stored in their packaging protected from light and at a temperature between 15°C to 24°C, with a relative humidity of 50% +/- 30%. When using an adhesive tape stored below 15°C, it is advisable to keep the tape at room temperature for 24 hours to preserve its characteristics.
volzFlex 1086 PV5 is a 0.18 mm thick, professional, self-extinguishing, electrically insulating soft PVC adhesive tape in premium quality with an aggressive, pressure-sensitive rubber-based adhesive. The tape complies with REACH and the European Directive 2011/65/EC (RoHS 2) and the Commission Delegated Directive (EU) 2015/863 (RoHS 3).
| Backing | Soft, PVC Film |
|---|---|
| Adhesive Type | Natural Rubber, pressure-sensitive |
| Total Thickness | 0,180 mm |
| Color | Black (04) |
| Adhesion to Steel | 5,00 N/25 mm (Stahl), 4,50 N/25 mm (Bandrücken) |
| Tensile Strength | 87,50 N/25 mm |
| Elongation at Break | 300% |
| Dielectric Strength | 45 kV/mm |
| Temperature Resistance | ‐18°C to +105°C |
| Length | 20 m, other lengths upon request |
| Width | 15 mm, 19 mm, 25 mm, 30 mm, 38 mm, 50 mm, other widths upon request |
| Storage Life | The material can be stored at room temperature for at least 12 months. |
| Additional Info | Self-extinguishing, VDE approval certificates in accordance with IEC 60454-3-1 |
Benefits
- Outstanding resistance to abrasion, corrosion and moisture
- Very good dielectric strength and mechanical resistance
- Uniform unwinding force
- Excellent conformability
- Good sealing properties
Application Instructions
- The tape must be tensioned in such a way that it guarantees optimum adhesion and a wrapping of at least two layers with a half overlap. Less tension should be applied to the end section to avoid layering.
- Surfaces must be kept clean and dry and free from dust, oil, grease and other foreign matter.