Applications
- Mounting of trim, emblems and lettering in the automotive industry
- LED lighting system bonding
- Electronic smart sevice component bonding
- For preventing electrolytic corrosion
- Used especially for high-temperature bonding where a foam backing is required
Benefits
- Strong, thin and flexible foam, keeps its dimensions and shape during punching / clean use
- Predetermined dimension sealant reduces waste
- For indoor and outdoor applications
- High UV-resistance
- Paper release film reduces dimensional change during application
- Good resistance to acids and alkalis
- Minimum compression of 20% for waterproofing
Storage Conditions
The Rolls should be stored in their packaging protected from light and at a temperature between 19°C to 21°C, with a relative humidity of 50%. When using an adhesive tape stored below 19°C, it is advisable to keep the tape at room temperature for 24 hours to preserve its characteristics.
volzMount 9076P is a double-sided, polyurethane-foam tape coated with acrylic adhesive. Due to its high density, the closed-cell foam offers low compressibility and yet good levelling properties on uneven and rough surfaces.
| Manufacturer | VOLZ® |
|---|---|
| Backing | |
| Backing (Filter) | PU Foam |
| Adhesive Type | |
| Klebemasse (Filter) | Acrylic |
| Total Thickness | |
| Gesamtdicke (mm) (Filter) | ≥ 0,400 mm |
| Color | |
| Liner | |
| Adhesion to Steel | |
| Tensile Strength | |
| Elongation at Break | |
| Shear Strength | |
| Static Shear | |
| Temperature Resistance | |
| Length | |
| Width | 12 mm, 15 mm, 19 mm, 25 mm, 30 mm, 38 mm, 50 mm, 6 mm, 9 mm, other widths upon request, 1200 mm |
| Storage Life | The material can be stored at room temperature for at least 12 months. |
Benefits
- Strong, thin and flexible foam, keeps its dimensions and shape during punching / clean use
- Predetermined dimension sealant reduces waste
- For indoor and outdoor applications
- High UV-resistance
- Paper release film reduces dimensional change during application
- Good resistance to acids and alkalis
- Minimum compression of 20% for waterproofing