Applications
- Printed circuits board assembly
- Flexible circuits
Benefits
- Very high temperature resistance
- Good chemical and solvent resistance
Storage Conditions
The Rolls should be stored in their packaging protected from light and at a temperature between 15°C to 24°C, with a relative humidity of 50% +/- 30%. When using an adhesive tape stored below 15°C, it is advisable to keep the tape at room temperature for 24 hours to preserve its characteristics.
Saint-Gobain / h-old® H220 is a Kapton® film coated on both sides with high quality pressure sensitive silicone adhesive and protected by fluorosiliconized polyester liner. Designed for high temperature electrical and electronis applications where a thin, conformable backing combined with excellent dielectrical properties are required. NuClear (00) radiations resistant. Flame retardant (UL 510).
| Manufacturer | Saint-Gobain / h-old® |
|---|---|
| Backing | Kapton® Film, Polyimide Film, double-sided |
| Backing Thickness | 0,025 mm |
| Adhesive Type | Silicone |
| Total Thickness | 0,100 mm |
| Insulation Class | H 180°C (DIN EN 60085, OANZ2 & OANZ8) |
| Color | Brown (79) |
| Liner | Fluorosiliconized Polyester |
| Adhesion to Steel | 6,75 N/25 mm |
| Tensile Strength | 112,50 N/25 mm |
| Elongation at Break | 35% |
| Dielectric Strength | 7200 V |
| Electrolytic Corrosion | 1 |
| Rolling Ball Tack | < 10 cm |
| Temperature Resistance | +260°C, (short-term) |
| Length | 33 m, other lengths upon request |
| Width | 6 mm, 9 mm, 12 mm, 15 mm, 19 mm, 25 mm, 30 mm, 38 mm, 50 mm, 1000 mm, other widths upon request |
| Storage Life | The material can be stored at room temperature for at least 6 months. |
Benefits
- Very high temperature resistance
- Good chemical and solvent resistance