volzAcrylicFoam 74050 PV2 is a high performance, 0,50 mm thick, transparent, double-sided, acrylic foam tape with a 0,14 mm, red PE liner. It is designed to create an extremely strong, seamless bond, specifically between transparent materials such as glass and plastics. volz AcrylicFoam 74050 PV2 is a soft, multi-purpose adhesive tape with high-tack, ensuring compatibility with both smooth as well rough surfaces. It offers versatility in a variety of applications, and can be used to replace mechanical fasteners such as rivets, screws, weld or liquid adhesives.
Applications
- Extremely strong bonding of transparent materials such as glass or plastic
- Indoor and outdoor applications
- Automotive wheel trims, mirrors and tread plates
- Outdoor signage and window grilles
- Fix lens window to housing
- White goods
- Mobile electronics bezel bonding
- Component mounting
Benefits
- Seamless bonding
- Excellent solvent, plasticizer, and moisture resistance
- Visco-elastic nature ensures strong bond which can absorb shock and stress
- Bonds well on smooth as well as rough surfaces
Storage Conditions
The Rolls should be stored in their packaging protected from light and at a temperature between 15°C to 24°C, with a relative humidity of 50% +/- 30%. When using an adhesive tape stored below 15°C, it is advisable to keep the tape at room temperature for 24 hours to preserve its characteristics.
| Manufacturer | VOLZ® |
|---|---|
| Backing | Acrylic Foam |
| Backing Thickness | 0,50 mm |
| Adhesive Type | Acrylic |
| Total Thickness | 0,64 mm (± 15%) |
| Color | Clear (00) |
| Liner | 0,14 mm, red PE Film |
| Adhesion to Steel | 62,50 N/25mm (90°) |
| Shear Strength | 1125 kPa |
| Static Shear | 1500 g (20° C), 500 g (90°C) |
| Temperature Resistance | -40°C to +150°C, +200°C (short-term) |
| Length | 66 m, other lengths upon request |
| Width | 4 mm – 900 mm, other widths upon request |
| Storage Life | The material can be stored at room temperature for at least 12 months. |
| Density | 0.93 g/cm3 |
| Slitting Tolerance | Length < 33m = ± 0,4mm (± 1/64"), Length > 33m = ± 0,8mm (± 1/32"), Lower tolerances on inquiry and perhaps against extra charge possible, Cross-wound spools are not similar to the above mentioned tolerances |
Benefits
- Seamless bonding
- Excellent solvent, plasticizer, and moisture resistance
- Visco-elastic nature ensures strong bond which can absorb shock and stress
- Bonds well on smooth as well as rough surfaces
Application Instructions
- Ensure that the surfaces to be bonded are completely clean and free from dust and grease
- The surfaces to be bonded should be dry and free from any loose particles
- The best cleaning medium is a solvent such as Isopropyl alcohol applied with a clean cloth or tissue
- To attain the optimum bond sufficient pressure should be applied to the surface area to be bonded. To ensure good adhesive “wet out” typical pressure should be 15PSI+100KPA
- The adhesive is pressure sensitive and best results are achieved with maximum surface contact under pressure
- 50% of bond strength is attained after 20 minutes. 90% of the optimum bond strength will be achieved after 24 hours. 100% is achieved after 72 hours
- Avoid significant load bearing to the bond directly after application Recommended application temperature +20°C to +36°C Minimum application temperature should not be below +10°C, (unless using the 3 series tapes, which accommodate lower application temperatures) Certain Surfaces will require priming or sealing such as porous surfaces – plaster and concrete, also absorbent surfaces such as untreated wood and fabrics Metals with Oxidised surfaces such as aluminium, copper and brass may need priming or abrading. Low energy surfaces such as Polypropylene plastics containing aggressive plasticisers may also need treatment