Applications
- On gold fingers for protection in wave soldering
Benefits
- Safe and clean removal from PCB
- High conformability
- The ESD function can reduce the discharge of electroplating static upon tape removal
Storage Conditions
The Rolls should be stored in their packaging protected from light and at a temperature between 15°C to 24°C, with a relative humidity of 50% +/- 30%. When using an adhesive tape stored below 15°C, it is advisable to keep the tape at room temperature for 24 hours to preserve its characteristics.
volzElektro 1018 PV6 is an electrical tape manufactured from 25µm thin polyimide film with 60µm anti-static silicone adhesive. The tape is suitable for pRotecting gold finger of PCB during wave soldering process.
| Manufacturer | |
|---|---|
| Backing | Polyimide Film |
| Backing Thickness | 0,025 mm |
| Adhesive Type | Silicone, anti-static |
| Total Thickness | 0,060 mm |
| Insulation Class | H 180°C (DIN EN 60085, OANZ2 & OANZ8) |
| Color | Amber (00) |
| Adhesion to Steel | 6,40 N/25 mm |
| Tensile Strength | > 88,00 N/25 mm |
| Elongation at Break | > 40% |
| Breakdown Voltage | 5500 V |
| Length | 33 m, other lengths upon request |
| Width | 6 mm, 9 mm, 12 mm, 15 mm, 19 mm, 25 mm, 30 mm, 38 mm, 50 mm, 1000 mm, other widths upon request |
| Storage Life | The material can be stored at room temperature for at least 12 months. |
Benefits
- Safe and clean removal from PCB
- High conformability
- The ESD function can reduce the discharge of electroplating static upon tape removal